Radios, power, water and light for the week the lights are out.

Radio

Programming a UV-5R with CHIRP

November 14, 2026 · 5 min read · Radios

CHIRP is free, open-source software that programs many radios from a computer and keeps the channel plan in a file. It is far faster than the keypad.

Transmitting on this radio needs an FCC amateur license (Technician or higher) and must stay on amateur bands. It is not certified for FRS, GMRS or MURS; transmitting there is illegal. Listening needs no license. In a life-safety emergency 47 CFR 97.403 lets a licensed amateur use any means available; it is not a general permission to transmit unlicensed.

The cable

You need a programming cable with a two-pin plug that fills the speaker and microphone jacks together. CHIRP recommends cables built on an FTDI chip, and warns against Prolific PL-2303 cables, which are widely counterfeited.

Browse Radios for every product in this list.

The steps

  1. Install CHIRP and test the cable before any outage.
  2. Turn the radio on. Push the two-pin plug fully into the side socket.
  3. Choose Radio, Download From Radio. Pick the port, then the vendor and model. CHIRP needs this download before any upload.
  4. Save the downloaded file before you change anything. It is your backup.
  5. Edit the channels.
  6. Choose Radio, Upload To Radio.
  7. Check a few channels on the radio by listening.

A listen-only plan

Store the NOAA Weather Radio channels your area hears, and the local repeaters. On every listen-only channel, set Duplex to off where CHIRP offers it, so the radio cannot transmit there by accident.

The license rules are in Do you need a license for a Baofeng?

What this guide is not

This guide is general information, not professional advice. It does not replace training, the manual that came with your gear, or the instructions of local officials. Menu numbers and models vary; check your radio's manual.

Sources

Frequently asked

What is CHIRP?

Free, open-source software that programs many radios from a computer and keeps the channel plan in a file (CHIRP).

Which cable do I need?

One with a two-pin plug that fills the speaker and microphone jacks together. CHIRP recommends cables built on an FTDI chip (CHIRP cable guide).

How do I stop the radio transmitting on a listen-only channel?

Set Duplex to off on that channel, where CHIRP offers it (Zero Dark Fall Field Guide, Baofeng).

The Field Guide covers water, shelter, first aid, navigation and radio, and works offline in the Zero Dark Fall app.

Read the Zero Dark Fall Field Guide →