Radios, power, water and light for the week the lights are out.

Power

Running a CPAP on a power station

November 14, 2026 · 5 min read · Power

A home CPAP stops in a power cut. Plan its power before the outage, with the machine's own manual and the maker's advice.

The humidifier sets the running time

ResMed figures for one machine, the AirStart 10 at 10 cmH2O: about 6.4 W with no humidifier, and about 41 W with the heated humidifier at setting 8. Over 8 hours that is about 51 Wh against about 330 Wh. ResMed rates the AirSense 11 power supply at 56.1 W typical. A different machine changes the sum; read your own manual.

DC first

  • ResMed recommends a DC-to-DC converter rather than an inverter for its machines.
  • On an inverter, ResMed specifies a pure sine wave model of at least 300 W continuous and 500 W surge, and warns that some heated humidifiers must never run on one.
  • Use only the maker's DC cord and battery adapter; other cords can damage the machine (Philips).
  • Do not run it from a car battery while the engine is running (Philips). Starting causes voltage spikes (ResMed).

When the power stops

  1. Take the mask off when the machine stops (Philips).
  2. When power returns, check that the settings have not changed (FDA).

Before the outage

Ask the device maker what it can run from (FDA), measure how long a battery lasts on your own settings, and make the outage plan with the doctor (Ready.gov). The station sums are in Sizing a power station in watt-hours.

Browse Power for every product in this list.

What this guide is not

This guide is general information, not professional advice. It does not replace training, the manual that came with your gear, or the instructions of local officials. It is not medical advice; follow your doctor and your machine's manual.

Sources

Frequently asked

How much power does a CPAP use?

It depends on the machine and the humidifier. ResMed figures put one machine at about 6.4 W with the humidifier off and about 41 W with it on (ResMed).

Should I use an inverter or a DC cord?

ResMed recommends a DC-to-DC converter rather than an inverter for its machines. Use only the maker’s DC cord and adapter (ResMed, Philips).

Can I run it from the car?

Not while the engine is running; starting causes voltage spikes that can damage the machine (ResMed, Philips).

Who should I ask before an outage?

The device maker about backup power, and the doctor about an outage plan (FDA, Ready.gov).

The Field Guide covers water, shelter, first aid, navigation and radio, and works offline in the Zero Dark Fall app.

Read the Zero Dark Fall Field Guide →